PARTES

[ GRAPHITE UPPER HOLDER FOR BUMPER ]

[ 347394 DRIVE SHAFT SET /REVOLVING SHAFT (2 SETS) ]

[ ROD END PLASTIC ]

[ STEERING ARM (2 PCS) - 1/8TH ]

[ ALU CLUTCH SHOES - HARD (3) ]

[  5X35MM TURNBUCKLES BLACK (2 PCS) ]

[ HIGH TORQUE CLUTCH SPRINGS SOFT (3) ]

[ GRAPHITE RADIO PLATE - MULTI-FLEX ]

[ XRAY SPRING-SET D=1.7 (22.5 LB) VIOLETA - MEDIUM ]

[ ALU ENGINE MOUNT - CNC MACHINED (L+R) ]

[ STEEL TURNBUCKLE SET ]

[ C-HUB (2 PCS) - 1/8TH ]

[ COMPOSITE AIR FILTER COVER ]

[ VENTILATED BRAKE DISK - LIGHTWIGHT ]

[ GRAPHITE SHOCK TOWER FRONT 3.0MM ] 

[ CLUTCH BELL BALL-BEARING 5x10x4 ]

[ BALL & SOCKET 7x8.5mm ]

[ SHOCK TOWER FRONT AND REAR (2 ) ]

[ LIGHTWEIGHT CARRIER FOR 2-SPEED GEAR (2nd) ]

[ FUEL TANK MOUNTING GROMMET (4) ]

[ BALL & SOCKET 7X12MM ]

[ PIVOT BALL MOUNT (4 PCS) ]

[ CLUTCH SPRING - HARD ]

[ 7MM BALL, 6 PCS. ]

[ XB808 CLUTCH BELL BALL-BEARING 5x12x4 (2) ]

[ ANTI-ROLL BAR FRONT 2.6 MM ]

[ HIGHT SEEP SALL BEARING 5X10X4 RUBBER ]

[ BALL-BEARING 6X10X3 RUBBER SEALED - OIL (2) ]

[ 2.3 SUSPENSION SPRINGS 16MM GT ]

[ SUSPENSION ARM PLATE - LOWER FRONT ]

[ REAR ADJUSTABLE ANTI-ROLL BAR - SET ]

[ BALL-BEARING 8X16X5 RUBBER SEALED - OIL (2) ]

[  C-HUB SCREW BUSHINGS (16 PCS) ]

[ ANTI-ROLL BAR REAR 2.2 MM ]

[ BALL-BEARING 8X14X4 RUBBER SEALED - OIL (2) ]

[ SHOCK SET (2) ]

[ NUT M2.5 Short (10) ]

[ ANTI-ROLL BAR REAR 2.4 MM ]

[  SHOCK CAP 16MM EMULSION ]

[ O-RING 19X1MM 16MM (4) ]

[ 3X56MM BH SCREW (8 PCS)  ]

[ LIGHTWEIGHT BRAKE DISK ADAPTER ]

[ SHOCK BODY 16MM IGT8 19 ]

[ 3X43MM BH SCREW (8) ]

[ FRONT MIDDLE SHAFT LIGHTWEIGHT ]

[ PINS 2X14MM (16 PCS) 1/8 TH ]

[ SILICONE O-RING 3.4x2  (10) ]

[ ALU LIGHTWEIGHT LOCATING COLLAR (2) ]

[ SHOCK SPRING ADJUSTER 16MM ]

[ INNER HINGE PINS 3X55MM (2) ]

[ ALU LIGHTWEIGHT LOCATING COLLAR ORANGE (2) ]

[ O-RING 10X1MM BOTTOM CUP (4) ]

[ SUSPENSION ARM - 1/8TH LOWER REAR (2) ]

[ PIN 2.5x13  (10) ]

[ GRAPHITE RECEIVER BRACKET SET ]

[ SHOCK PISTON 16MM (8) ]

[ REAR HUB - L/R 1/8TH ]

[ PIN 3x17 (10) ]

[ GRAPHITE PERSONAL TRANSPONDER BRACKET ]

[ GT SHOCK SHAFTS ]

[ B HEAD SCREW (BM3*18MM) 16 PCS ]

[ PIN 2.5x16 (10) ]

[ COMPOSITE ROLL-OVER BAR WITH EYELET ]

[ COMPOSITE ANTENNA MOUNT ]

[ 6MM BALL STELL (NO COLLAR) ] 

[ ADDITIONAL XRAY ULTIMATE RACING SPRINGS (20) ]

[ REAR WING ]

[ XRAY SPRING-SET D=1.8 (33 LB) PURPLE - MEDIUM HARD ]

[ MOTOR MOUNT-UPPER/LOWER ]

[ XRAY SPRING-SET D=1.9 (38 LB) RED - HARD ]

[ SET C=4.0-5.6 -  REAR (2) ]

[ BEARING SET FOR IGT8 CLUTCH BELL - PINION MOD 1 ]

[ SERVO MOUNT ]

[ SET C=4.0-5.6 -  FRONT (2) ]

Mola de Amortecedor Progressiva Dianteira Original
Medida: 20mm / 1.5mm
Quant. 02

Aplicação:

XRAY NT1R
XRAY NT1 2009 Specs
XRAY NT1 2010 Specs
XRAY NT1 2011 Specs
XRAY NT1 2012 Specs
XRAY NT1 2013 Specs
XRAY NT1 2014 Specs
XRAY NT1 2015 Specs
XRAY NT1 2016 Specs
XRAY NT1 2017 Specs
XRAY NT1 2018 Specs
XRAY NT1 2019 Specs
XRAY NT1 2020 Specs
XRAY NT1 2021 Specs
XRAY NT1 2022 Specs
XRAY NT1 2023 Specs

[ SERVO ARM (2 PCS) ]

[ XRAY PROGRESSIVE SPRING SET C3.7-4.7 REAR  ]

[ BALL BEARING 8X16MM 2PCS ]

[ XRAY SPRING-SET D=1.7 (28.5 LB) DARK-BLUE  ]

[ BALL BEARING 13X20MM 4PCS ]

[ XRAY SPRING-SET D=1.7 (30.5 LB) VIOLET ]

[ BEARING SET FOR 2-SPEED CARRIER FOR IGT00200 ]

[ STEERING TIE ROD (2 PCS) 1/10 ]

[ XRAY SPRING-SET D=1.8 (38.5 LB) RED HARD ]

[ CHASSI MAXIMUS EP ]

[ BALL-BEARING 5x8x2.5MM (2) ]

[ EP SIDE GUARD-L/R ]

[ CLUTCH SHOE - HIGH DYNAMIC - RED ]

[ BALL-BEARING 5x10x4MM (2) ]

[ BATTERY MOUNT A/B ]

[ CLUTCH SPRING MEDIUM ]

[ UPPER DECK MOUNT-F/R ]

[ MULT-FLEX 1 PIECE ALU ENGINE MOUNT ]

[ METAL SHIELDED BEARING SET FOR IGT800F10 ]

[ CENTER FRONT DRIVE SHAFT C ]

[ ALU 1 PIECE ALU ENGINE MOUNT MONOBLOCK ]

[ BEARINGS 6X10X3 (4 PCS) ]

[ EXHAUST MOUNTING WIRE EXTRA LONG ]